Medium-bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings, SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can.

TAPE SEAL PTFE 1X520

MEGALOCK 4OZ THREAD SEALANT #158

Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leak-proof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents.

Fibered repair mastic, designed to patch roof surfaces. Use in wet or dry conditions to seal and stop leaks around flashings, skylights, vent pipes, chimneys and valleys. For the repair of cracks, seams and holes in all roofing materials. Can be used below-grade as a heavy-duty foundation waterproofing and damp-proofing. Thick trowel grade. Covers approximately 12 sq-ft per gal when applied 1/8 in thick.

Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.

Ptfe thread seal tape blue spool - bulk - 1/2 inch x 260 inches 0.4 density, 0.003 inches thick. Over 50% elongation and chemically inert.

Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dias. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.

GREASE FAUCET-VALVE 1OZ
Resists high temperature, waterproof ; Apply to stems of faucets, valves, ballcocks, plungers, and washers ; Prevents rust ; Use on hot water or steam to 350?

For use on plumbing threads to prevent leaking.

Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.

0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxicand non-flammable. Meets Federal Specification T-27730A.

Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included.

Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.

GAS LEAK DETECTOR 2OZ